English
Underhung End Carriage
Product Description
SCE series end carriage is special designed for under-hung overhead crane. This series end carriage can do bevel wheel for I beam, and flat wheel for H beam, and can be equipped with NANTE’s soft-start motor or RF series motor for different budget. In additions, NANTE can offer the advanced safety functions, like anti-sway, cross limit switch, photo sensor, sound and revolving light etc.
Features
| 1） | Use deep groove ball seal bearing, free lubrication. |
| 2） | Can use bevel wheel for I beam, and flat wheel for H beam |
| 3） | The wheel groove and gear surface is done by the high frequency heat treatment, and the hardness can reach to 45-55 HRC |
| 4） | The motor also can be controlled by inverter for step-less speed. |
| 5） | SA2.5 class surface pre-treated by shot blasting, and the painting system is C3-C5 according to ISO 12944-5. |
Technical Parameter
| Model | Wheel Dia. | Motor Selection | Speed(m/min) | Duty Group |
| SCE-N Under-hung End Carriage | 100mm-200mm | NT Soft Start Gear Motor | 20 | M3-M4 |
| SCE-H Under-hung End Carriage | 100mm-200mm | RF Series Gear Motor | 20-40 | M3-M6 |
Key Components and Application areas
